Water is essential for everyday life, but not all water is created equal. Hard water contains minerals like calcium and magnesium and while mineral-rich water has its benefits, it can cause a variety of problems for homeowners, including clogged pipes, build-up on fixtures, and even higher energy bills. So is it really true that hard water costs more to heat? Let’s take a closer look.

What Is Hard Water?

Hard water is simply water that has a high mineral content. These minerals are usually calcium and magnesium carbonates, but can also include iron, manganese, and sulphates. The amount of minerals in the water determines how hard it is – the more minerals present, the harder the water. Signs that you may have hard water include limescale build up on your appliances and surfaces (such as taps, shower heads and kettles). It appears as a hard, chalky deposit that can be extremely stubborn to remove and can cause many problems in the home.

How Does Hard Water Affect Heating Costs?

The minerals in hard water can have an impact on your energy bills because they reduce the efficiency of your hot water heater. Minerals build up on the heating elements of your water heater over time, reducing its ability to transfer heat into the water efficiently. This means that it takes more energy (and money) to heat up the same amount of hard water as it would soft water. So in short: Yes! Hard water does cost more to heat.

How Can You Reduce Heating Costs with Hard Water?

Fortunately, there are several ways you can reduce heating costs with hard water:

1. Install a Water Conditioner: A Halcyan Water Conditioner will treat the water as it enters your home. This means that every drop of water in your house passes through the unit before it enters any appliance with a heating element. Not only will this reduce existing limescale in your appliances, it will continue to keep them limescale-free so they can work at maximum efficiency.
   
2. Use Hot Water Efficiently: You can also reduce heating costs by using hot water as efficiently as possible – only running full loads in your dishwasher or washing machine, taking shorter showers, etc. This will help reduce how often you need to heat up hard water which will save you money in the long run. 
3. Lower Your Hot Water Temperature: Lowering the temperature setting on your hot water heater will also help reduce heating costs with hard water since it takes less energy to heat up lower temperatures than higher ones.

Conclusion

So does hard water cost more to heat? Yes – due to mineral build-up on heating elements over time, it takes more energy (and money) to heat up hard water than soft water which can lead to higher energy bills over time if left unchecked. Fortunately there are several ways you can reduce these costs such as installing a Halcyan Water Conditioner or using hot water efficiently – so don’t let hard water get you down!

If you’d like to find out more about the Halcyan Water Conditioner, you can explore our Knowledge Centre and find out how it works here. You can call our expert team on 0345 504 0656 for more information on how you can heat your water for less, by installing a Halcyan.

Why choose Halcyan?

Halcyan Water Conditioners is a British company based in Bristol and our alloy-based solution to hard water is unique to the UK. As leaders in our industry, our mission is to help our customers save money, save energy and save the planet with our eco-friendly, people-friendly water conditioners. We take huge pride in our customer satisfaction and our testimonials speak for themselves. With our 30 Year Warranty and our 12 Month Money Back Performance Guarantee, you can put your trust into Halcyan Water Conditioners.

Does hard water affect boilers? Hard water is a common problem in many parts of the UK, affecting up to 60% of households, and it can have a significant impact on the performance of boilers. In this blog post, we’ll explore the effects of hard water on boilers and what you can do to protect your boiler from damage.

What is Hard Water?

Hard water is water that contains high levels of minerals such as calcium and magnesium. These minerals are naturally occurring in groundwater and can be found in most areas of the world. Hard water can cause a variety of problems, including scaling, clogging, and corrosion. It can also reduce the efficiency of boilers by reducing heat transfer and increasing energy consumption.

How Does Hard Water Affect Boilers?

Hard water can cause a number of problems for boilers, including:

• Scaling: Scaling occurs when minerals such as calcium and magnesium build up on the surfaces inside the boiler. This build-up reduces heat transfer efficiency, leading to increased energy consumption and decreased performance. 
• Clogging: Limescale caused by hard water can also clog pipes and other components within the boiler system, reducing flow rate and leading to decreased performance. 
• Corrosion: The minerals in hard water can also cause corrosion of metal components within the boiler system, leading to leaks or other damage.

Protection Strategies for Boilers

Fortunately, there are steps you can take to protect your boiler from damage caused by hard water. Here are some strategies you should consider:

A Water Conditioner: Installing a water conditioner is one way to change the way the minerals behave in your boiler’s feed water supply. This will help reduce scaling, clogging, and corrosion within your boiler system.

Regular Maintenance: Regularly inspecting your boiler system for signs of wear or damage is important for keeping it running efficiently. Make sure to check for signs of scaling or corrosion on any metal components within your system regularly.

Chemical Treatments: Chemical treatments such as de-scalers or anti-corrosion agents can help reduce mineral build-up within your boiler system over time. Be sure to use products specifically designed for use with boilers so that they don’t cause any additional damage to your equipment.

How will the Halcyan Water Conditioner help your boiler?

The Halcyan Water Conditioner has been tried and tested by forward-thinking households for more than 30 years! Over time the Halcyan will actually remove limescale from within your boiler and heating system, and elsewhere in the home. Once installed, it will keep limescale at bay and any water entering your house will ‘behave’ like soft water does within the pipes. This means that over time, you should see your appliances (including your boiler) needing fewer repairs and less maintenance, and even a delay to the replacement of your appliances, as well as lower energy bills.

Conclusion

Hard water can have a significant impact on boilers if left unchecked. Our recommendation is that a simple, cost effective solution is to install a Halcyan Water Conditioner to prolong your boiler’s health. We all know the pain and high cost of replacing a boiler due to unchecked limescale, especially when your boiler fails unexpectedly – and the solution is so simple, you’ll wonder why you didn’t do it years ago!

Want to know more about the Halcyan Water Conditioner? Find out how it works here or call our expert team on 0345 504 0656.

Why choose Halcyan?

Halcyan Water Conditioners is a British company based in Bristol and our alloy-based solution to hard water is unique to the UK. As leaders in our industry, our mission is to give our customers limescale-free, healthy and more enjoyable water experiences. We will always provide crystal clear, unbiased information for anyone considering a water conditioner – even if that means they don’t choose a Halcyan! With our pride in customer satisfaction and our 12 Month Money Back Performance Guarantee, you can put your trust into Halcyan Water Conditioners.

Limescale is a common problem that can be found in many homes. This chalky white deposit that forms on surfaces due to hard water can be difficult to remove. If you’re looking for a way to get rid of limescale permanently, then you’ve come to the right place! In this blog post, we’ll discuss the best methods for removing limescale and preventing it from coming back.

What is Limescale?

Hard water contains high levels of calcium and magnesium, which create a mineral residue that sticks to surfaces and can be difficult to remove. Limescale can form on sinks, taps, showers, toilets, and other surfaces in your home, as well as on heating elements, for example in your kettle.

How to Remove Limescale

The first step in getting rid of limescale is to remove as much of it as possible from the surface. This can often be done by using a scrubbing brush or an abrasive cleaner such as vinegar or baking soda and a bit of elbow grease. For tougher deposits, you may need to use a chemical cleaner such as Viakal. 

Preventing Future Build-up

Once you’ve removed the existing limescale from your home, it’s important to take steps to prevent future build-up. The best way to do this is by installing a water softener or water conditioner in your home. The two solutions work in very different ways. You can read more about the differences in our blog post on the topic here.

While water softeners are the traditional limescale-prevention method, they use salts and expel briny effluent into the watercourse. So, if you’re looking for a sustainable, eco-friendly solution then a water conditioner may be a better solution for your needs.

Why choose Halcyan?

The Halcyan Water Conditioner is a 100% passive solution to the problem of limescale in the home and is entirely salt and maintenance free. With a 30 year warranty, it’s the only solution you’ll ever need. 

You can find out more about how the Halcyan Water Conditioner works here, or to find out what our customers have to say about our products, visit our testimonials page.

Water conditioners are essential pieces of equipment for many households, but do you really need one? In this blog post, we will explore the benefits of having a water conditioner in your home and answer the question: do I really need a water conditioner?

What is a Water Conditioner?

A water conditioner is a device that treats hard water as it enters the home and affects the ability of limescale to form on surfaces and within fixtures, fittings and appliances. A good quality water conditioner will reduce existing limescale build-up and prevent more limescale from forming, so you don’t have to worry about descaling in your home or unnecessary repairs to expensive appliances. You can learn more about how water conditioners work and how they differ from water softeners in our helpful guide here.

Is a Water Conditioner a good investment?

Installing a good quality water conditioner will not only help to protect your home, but can actually save you money on your household bills, appliance replacement and even on household purchases such as cleaning products and detergents.

Save money on bills

Limescale is an excellent insulator so heating water requires a lot more energy when limescale is present. When you consider how often you heat water in the home (think showers, dishwashers, washing machines, kettles etc) the savings that can be achieved are considerable. In fact, just 3mm of limescale on a heating element can increase energy consumption by up to 25%! At current energy prices, the average household can expect to save up to £500 per year on their energy bills simply by treating hard water.

Reduce appliance maintenance and replacement

When limescale builds up in an appliance, it affects its efficiency and can ultimately lead to complete failure. By treating hard water, you’re preventing limescale build-up in your appliances which means they will last for much longer.

Spend less on household purchases

When hard water is treated detergents not only become more effective, but you need less of them to achieve the same result. This applies to shampoo, washing up liquid, and any other soap or detergent you use in the home so you can expect to reduce the amount you buy. And, as you’ll no longer be cleaning limescale from your taps and surfaces, you have less cleaning to do and need fewer cleaning products in the home!

Do I Really Need a Water Conditioner?

So now that we’ve explored some of the benefits of having a good quality water conditioner installed in your home, do you really need one? 

If you live in a hard water area then yes, we’d recommend you install a device to treat your water. Not only will you achieve the benefits of better behaved water, with a Halcyan Water Conditioner, you’ll benefit from 30+ years of hard water treatment with zero maintenance or ongoing costs.

Got questions?

Visit our FAQ page to find answers to our most commonly asked questions. Or, for advice from one of our experts, call 0345 504 0656.

Limescale is a common problem in many households and affects around 60% of the UK. It can cause a variety of problems, from damaged fixtures and fittings to the premature breakdown of expensive appliances. But why does limescale reduce efficiency? In this blog post, we’ll explore the causes and effects of limescale on appliance efficiency.

What is Limescale?

Limescale is a hard, chalky deposit that forms when calcium and magnesium precipitate out of hard water and bond to surfaces. It often appears as a white or grayish-white coating on surfaces such as taps, showerheads, pipes and on the heating element of your kettle. Over time, limescale can build up and become difficult to clean, and the longer it’s left the harder it is to remove.

How Does Limescale Reduce Efficiency?

Limescale reduces efficiency in two main ways: by blocking water flow and by reducing heat transfer. 

When limescale builds up inside pipes or appliances it restricts the flow of water. If you’ve ever had a shower head clogged with limescale, you’ll know how frustrating this can be and how often you have to clean it to maintain the optimum flow of water.

Limescale also reduces the flow of heat which means it takes a lot more energy to heat the water surrounding a heating element which is covered in limescale. This reduces the energy efficiency of water-heating appliances such as washing machines, dishwashers, and boilers, and energy bills are significantly higher as a result.

Limescale also reduces the lifespan of water-bearing appliances by causing corrosion and additional wear on internal components, so you can expect to replace your expensive household items up to twice as often.

How Can You Prevent Limescale Build-Up?

The best way to prevent limescale build-up is to treat hard water as it enters your home. There are various hard water treatment products on the market, from salt softeners to water conditioners.  They help keep your appliances running more efficiently and for longer without needing expensive repairs or replacements due to limescale damage.

While salt softeners are a traditional solution to the problem of limescale, they require ongoing maintenance and regular topping up of salt. If you’re looking for a passive, sustainable and eco-friendly means of treating your hard water, a water conditioner such as the Halcyan is a good choice. You can read more about your options in our no-nonsense guide to water conditioners and water softeners here.

Conclusion

Limescale can be a major problem for households which are supplied with hard water. Not only does it cause unsightly deposits on surfaces, but it can also reduce the efficiency of appliances over time due to blocked water flow and reduced heat transfer capabilities, leading to higher energy bills and  premature appliance failure. The most sustainable way to prevent this issue is to install a water conditioner in your home.

Why not take a look at our testimonials and discover why Halcyan is THE solution for sustainable hard water treatment in the home.

Limescale on your shower head and other appliances? We take a look into how to deal with this problem aswell as how to prevent future limescale build up.